Right EV Disc Brake Master Cylinder

The DISC PUMP [RIGHT] is a handlebar-mounted hydraulic master cylinder assembly engineered for electric scooters, e-bikes, mopeds, and light electric vehicles (LEVs). Installed on the right side of the handlebar perch (typically controlling the front hydraulic disc brake system), it converts hand lever displacement into high fluid pressure inside the brake line.

Constructed from die-cast high-strength aluminum alloy with corrosion-resistant internal piston seals, this right master cylinder assembly features an integrated fluid reservoir, sight glass window, and brake lever perch. Operating independently across 12V to 60V DC vehicle architectures, its leak-proof, pressure-stable design ensures crisp, linear lever feedback and fade-resistant hydraulic actuation under all riding conditions.

Key Features

• Right-Side Perch Ergonomics: Specifically engineered for right handlebar mounting (standard front hydraulic disc brake control).
• Leak-Proof Internal Piston Seals: Precision-machined internal cylinder bore and oil-resistant seals prevent fluid pressure loss and weeping.
• Integrated Reservoir & Sight Glass: Built-in fluid reservoir with clear sight glass allows easy monitoring of DOT brake fluid levels and condition.
• Die-Cast Aluminum Construction: Durable alloy body dissipates heat rapidly and resists impact damage, corrosion, and high hydraulic pressure.
• Standard Mirror Mount & Switch Port: Includes integrated rearview mirror mounting threads and a brake sensor switch port.

1x DISC PUMP [RIGHT] Unit (master cylinder body, reservoir cap, and handlebar clamp bracket)

Suitable Vehicle Types & Applications

• Electric Scooters & Mopeds: Primary right handlebar master cylinder replacement for 48V–60V e-scooters with front hydraulic disc brakes.
• E-Bikes & Light LEVs: Durable hydraulic brake pump for electric bicycles and cargo delivery two-wheelers.
• Personal & Fleet Repairs: Essential replacement unit for cracked, leaking, or spongy right brake master cylinders.

System & Electrical Compatibility

• Universal Hydraulic Lines & Calipers: Fully compatible with standard DOT3/DOT4 hydraulic hose lines, banjo fittings, and disc brake calipers.
• Wide EV Sub-Circuits: Operates independently of electrical system voltage across 12V to 60V DC vehicle platforms.

1. Isolate Power & Remove Damaged Right Master Cylinder:

Turn off key ignition, trip main DC circuit breaker, and place a fluid catch tray under the right handlebar perch. Unbolt the hydraulic banjo line, allow fluid to drain, disconnect the brake sensor switch wire, and unclamp the old pump from the handlebar.

Verification: Vehicle is unpowered and the old right master cylinder is removed with zero residual line pressure.

2. Mount New Right Disc Pump to Handlebar:

Position the DISC PUMP [RIGHT] onto the right 22mm handlebar stem and tighten the rear clamp bracket bolts securely.

Verification: The master cylinder sits firmly on the handlebar without twisting or interfering with throttle action or grip switches.

3. Connect Hydraulic Hose & Sensor Wire:

Attach the hydraulic hose banjo fitting to the master cylinder fluid port using fresh copper crush washers on both sides of the banjo bolt. Connect the brake cut-off sensor wire plug.

Verification: Banjo fitting sits flush with copper crush washers compressed evenly, and sensor plug latches tightly.

4. Refill Fluid, Bleed Air & Verify Pressure:

Remove reservoir cap and fill with fresh DOT3 or DOT4 brake fluid. Open the caliper bleed valve and pump the right lever until all air bubbles are purged and fluid flows solid. Tighten bleed valve, top off fluid, and seal reservoir.

Verification: Squeezing the right brake lever yields immediate, firm resistance with zero spongy lever feel and no fluid leaks around banjo fittings or reservoir cap.