LEAF / EV Chargers
69V 6A Lithium EV Charger for LFP Battery Pack (69.3V Fast Charger)
Safe, Smart, and Efficient Charging for 60V LFP Electric Vehicles
GST & Shipping IncludedPan-India delivery · Subject to serviceability
Book with 5% online. Pay the remaining amount on delivery.
Overview
The 69V 6A Lithium EV Charger delivers stable, safe, and precise power to 60V LiFePO4 (LFP) lithium battery packs. With intelligent CC/CV charging modes, built-in active cooling, and comprehensive electrical safety protections, it protects individual battery cells from overcharging while ensuring reliable daily power restoration for electric two- and three-wheelers.
Technical specifications
- Compatible battery chemistry
- LFP / LiFePO₄
- Brand
- LEAF
- Compatible battery nominal voltage
- 60V
- Output charging voltage
- 69.4V
- Charging current
- 6A
- Output connector type
- C13 female 3-pin
- Compatible battery series configuration
- 19
- Supported battery capacity
- > 30 Ah
- Compatible vehicles/applications
- Electric scooter, e-bike; Electric motorcycle, Electric rickshaw
- AC input voltage
- 180–240V AC
- Automatic charging cutoff
- Yes
- Protection features
- Overvoltage; overcurrent; short circuit; overheating; reverse polarity
- Charging status indicators
- LED
- Cooling system
- Fan cooling; natural air cooling
- Charging method
- Verified CC/CV profile and termination method
- Output power
- 415.8 Watt
- Input plug type
- Standard BS 546
- Enclosure material
- Aluminium
What is included
69.3V 6A LFP EV Charger
Suitable applications
60V Electric Scooters & E-Bikes with 24S LiFePO4 (LFP) Battery Packs
Custom 60V LFP Lithium Battery Assemblies
E-Rickshaws and Commercial EV Fleet Vehicles
How to use
Step 1 | Turn off the electric vehicle ignition key and main power switch.
Step 2 | Firmly connect the charger's DC output plug into the vehicle's battery charging port.
Step 3 | Plug the AC power cord into a properly grounded standard 220V AC electrical wall socket.
Step 4 | Switch on the wall switch; the charger LED indicator will turn red to signal active charging.
Step 5 | When the LED turns green, indicating full charge and auto-cutoff, turn off the wall switch and safely unplug the connector.
Care and maintenance
Storage | Store the charger in a dry, clean, well-ventilated area protected from moisture, rain, and direct sunlight.
Dust Control | Regularly check and keep the cooling fan vents free of dust accumulation to maintain proper heat dissipation.
Cable Care | Unplug by holding the socket connectors directly; never jerk or pull on the wires.
Questions & answers
How to maintain charger longevity?
Keep in a cool, moisture-free location and ensure ventilation slots are never blocked during operation.
Is the cooling fan noise normal?
Yes, the internal cooling fan runs automatically during active charging to keep thermal levels safe.
Can I use this charger for NMC batteries?
No, this unit is calibrated specifically for 24S LiFePO4 (LFP) chemistries with a peak output of 69.3V.
Does it stop charging automatically when full?
Yes, it features intelligent auto-cutoff technology that stops power flow once the battery reaches full voltage.
What should I do if the charger stays red for too long?
Check whether the battery pack is significantly discharged or if cell balancing is in progress, and ensure a proper wall socket power supply.